BETAFPV F722 35A 2-6S AIO Brushless Flight Controller V2 with BLHeli_32 ESC No RX with ICM42688 Gyro 16MB BlackBox for 4-5” Drone Quadcopters like Pavo30 X-Knight 5” TWIG XL Drone Quadcopter

Add your review

$103.99

$103.99

Check Price

Add to wishlistAdded to wishlistRemoved from wishlist 0

Description
BLHeli_32 ESC Firmware
The F722 35A AIO FC has two boards with completely different ESC variations for selection. This V2 board makes use of AT32F421G8U7 MCU, a 32-bit ESC chip, with BLHeli_32 ESC firmware. This firmware helps as much as 128k PWM frequency, that includes sooner processing pace and unlocking extra capabilities for the flight.

FC
Item: F722 35A AIO Brushless Flight Controller
Weight: 9.00g (BLHeli_32)
CPU: STM32F722RET6
Six-Axis: ICM42688
Mounting gap dimension: 26mm*26mm
Firmware model: betaflight_4.3.0_STM32F7X2
OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)
Support programmable LED like WS2812 and many others
Built-in present sensor
Blackbox: 16MB (V2 with BLHeli_32 ESC included)

ESC
Signal assist: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/Flysky Receiver/DSMX Receiver/TBS Crossfire Receiver (requires exterior connection)
Input voltage: 2S-6S Lipo
Continuous present: 35A
Peak present: 40A
ESC firmware: BETAFPV_35A_V2_BLHeli_32_Multi_32_9 (BLHeli_32) Indicators: Power indicator (Red) / FC indicator (Blue)
Capacitance: CS|5*10*13mm|470μF|35V
Connector: 80mm 14AWG silicone cable with XT60
Recommended motors: 14XX sequence, 15XX sequence, 16XX sequence, 18XX sequence, 20XX sequence

Recommended Parts
BNF: extremely suggest for X-Knight 5″, Pavo360, Pavo30
Battery: 4-6S Battery, BETAFPV 850mAh 4SBattery 450mAh 4S Battery
VTX: BETAFPV A03 400mW 5.8G VTX
Motor: 1805 1550KV brushless motor, 2004 Brushless Motors, 1606 Brushless Motor, 1506 Brushless Motor, 2204 Brushless Motors, 2306 Brushless Motors
Compatible Propellers: Gemfan 5125 3-Blade props, BETAFPV 4-5 inch props

Package
1 * F722 35A AIO Brushless Flight Controller (V1 or V2)
1 * Cable Pigtail (XT60)
1 * Capacitance
1 * 6-Pin Connector for HD Digital VTX
4 * M2x10mm Screws
8 * M2 Nuts

【Pluggable Pin】Featuring a 6-pin plug&play port, it will probably instantly join HD Digital VTX with NO soldering work. Perfect for the pilots who benefit from the HD Digital VTX system.
【Six UARTs】6 full UARTs can be found on this board. With loads of UARTS, Pilots might have extra choices for exterior components like VTX, GPS, Receiver, and different parts.
【Stable Performance】F722 35A AIO flight controller can endure 35A steady present(40A burst), utterly helps the 2-6S lipo battery, it provides the drone with stronger flight efficiency. With the assist of as much as 6S enter voltage, this FC pushes FPV racer to the max.
【Drone&Motor】F722 AIO 35A FC is appropriate with 4-6S FPV brushless motors like 15xx 16xx 18xx 20xx FPV brushless motors. Suitable for constructing 4-5” toothpick drones. The drone will break via the restrict of the facility of the toothpick drone, exploring extra prospects.

BETAFPV F722 35A 2-6S AIO Brushless Flight Controller V2 with BLHeli_32 ESC No RX with ICM42688 Gyro 16MB BlackBox for 4-5” Drone Quadcopters like Pavo30 X-Knight 5” TWIG XL Drone Quadcopter
BETAFPV F722 35A 2-6S AIO Brushless Flight Controller V2 with BLHeli_32 ESC No RX with ICM42688 Gyro 16MB BlackBox for 4-5” Drone Quadcopters like Pavo30 X-Knight 5” TWIG XL Drone Quadcopter

$103.99

*I use affiliate links at no cost to you. If you choose to make a purchase through my link I make a small commission. Thank you for trusting my recommendations!
Mighty Power Tools
Logo
Enable registration in settings - general
Shopping cart