BETAFPV F722 35A 2-6S AIO Toothpick Brushless Flight Controller 35A BLHeli_S ESC No RX with ICM42688 Gyro Compatible for 4-5” Toothpick Drone Quadcopter like X-Knight 5” Toothpick Quadcopter

Add your review

$93.99

$93.99

Check Price

Add to wishlistAdded to wishlistRemoved from wishlist 0

Know More About ICM42688 Gyro
The F722 FC ICM42688 model has the identical solder pad and structure as BMI270 besides for the gyro chip.
Besides, it’s also possible to discover the distinction in Betaflight settings.

The ICM42688 gyro helps 8.00 kHz gyro replace frequency in contrast with the BMI270 gyro which helps 3.00 kHz. When utilizing a 6S battery, the ICM42688 gyro has a very good efficiency.

The diploma between ICM42688 and BMI270 gyro is totally different. When configuring F722 FC ICM42688 model, the gyro diploma needs to be set to CW270°.

Specification of FC
Item: F722 35A AIO FC(BLHeli_S)
Weight: 7.06g
CPU: STM32F722RET6
Six-Axis: ICM42688
Mounting gap measurement: 26mm* 6mm
Firmware model: betaflight_4.3.0_STM32F7X2
OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)
Support programmable LED like WS2812 and so on
Built-in present sensor

Specification of ESC
Signal help: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/Flysky Receiver/DSMX Receiver/TBS Crossfire Receiver (requires exterior connection)
Input voltage: 2S-6S Lipo
Continuous present: 35A
Peak present: 40A
ESC firmware: BLHeli_S
Indicators: 2 indicators: receiver indicator (inexperienced)/Flight management energy indicator (purple)
Capacitance: CS|5*10*13mm|470μF|35V
Connecter: 80mm 14AWG silicone cable with XT60
Recommended motors: 14XX collection, 15XX collection, 16XX collection, 18XX collection, 20XX collection

Package
1 * Toothpick F722 35A AIO 2-6S brushless flight controller
1 * Cable Pigtail (XT60U)
1 * Capacitance
1 * 6-Pin Connector for DJI Digital VTX
4 * M2x10mm Screws
8 * M2 Nuts “
【Upgraded Point】Compared with F4 AIO 35A FC, F722 FC’s firmware is upgraded from F411 to F722, delivering a greater efficiency capability and better computation velocity, which brings pilots a extra regular and smoother flight.
【Pluggable Pin】F722 AIO 35A FC has particularly added a 6-pin connector for DJI Digital VTX, simply plug & play, much less solder work required, very best for the pilots who love the DJI Digital VTX system.
【Six UARTs】6 full UARTs can be found on this board. With loads of UARTS, Pilots might have extra choices for exterior elements like VTX, GPS, Receiver, and different elements.
【Stable Performance】F722 35A AIO flight controller can endure 35A steady present(40A burst), fully helps the 2-6S lipo battery, it provides the drone with stronger flight efficiency.
【Drone&Motor】F722 AIO 35A FC is suitable with 4-6S FPV brushless motors like 15xx 16xx 18xx 20xx FPV brushless motors. Suitable for constructing 4-5” toothpick drones. The drone will break by way of the restrict of the facility of the toothpick drone, exploring extra potentialities.

BETAFPV F722 35A 2-6S AIO Toothpick Brushless Flight Controller 35A BLHeli_S ESC No RX with ICM42688 Gyro Compatible for 4-5” Toothpick Drone Quadcopter like X-Knight 5” Toothpick Quadcopter
BETAFPV F722 35A 2-6S AIO Toothpick Brushless Flight Controller 35A BLHeli_S ESC No RX with ICM42688 Gyro Compatible for 4-5” Toothpick Drone Quadcopter like X-Knight 5” Toothpick Quadcopter

$93.99

*I use affiliate links at no cost to you. If you choose to make a purchase through my link I make a small commission. Thank you for trusting my recommendations!
Mighty Power Tools
Logo
Enable registration in settings - general
Shopping cart